El CR310 es un datalogger multipropósito para medida y control, compacto, de bajo coste, que tiene integrado puerto 10/100 Ethernet y borneros removibles. Este datalogger de gama básica, con su potente conjunto de instrucciones programables, puede medir la mayoría de sensores para hidrología, meteorología, medioambiente e industria. Como concentrador de datos, los pone a disposición a través de variedad de redes de telecomunicaciones y protocolos. El CR310 tiene capacidad de tomar decisiones, perfecto en aplicaciones para control y comunicaciones M2M. El CR310 es ideal para aplicaciones remotas básicas de monitorización y control a largo plazo.
- Fácil configuración mediante software PC y la conectividad USB
- Medir con confianza sensores analógicos y digitales
- Preparado para Internet – email, FTP, HTTP/web, TCP, ModBus (CR310 por GPRS/3G y EtherNet, CR300 sólo GPRS/3G)
- Confíe en la calidad Campbell Scientific, incluye protecciones contra transitorios y ESD
- Ahorro de dinero y espacio con el puerto Ethernet integrado
- Opción radio para comunicaciones inalámbricas con otos nodos de la red, y puerta de enlace a Internet
- CR310-WIFI ideal for short-range, wireless IP communication
- Comunicaciones desde cualquier lugar mediante modems telefonía móvil o satélite
- Carga de batería de 12V por panel solar o adaptador corriente, mediante el propio regulador de carga integrado
- Medida de smart sensors por RS-232 o SDI-12
- Conectividad protocolos comunicaciones PakBus, Modbus, DNP3, GOES, y otros
- Análisis y control programables, múltiples I/O de propósito general
- Generar notificaciones y comunicaciones en función de eventos y salidas físicas
| -NOTE- |
Additional specifications are listed in the CR300-Series Specifications Sheet. |
| Operating Temperature Range |
- -40° to +70°C (standard)
- Non-condensing environment
|
| Maximum Scan Rate |
10 Hz |
| Case Material |
Powder-coated aluminum |
| Analog Inputs |
6 single-ended or 3 differential (individually configured) |
| Pulse Counters |
8 (P_SW, P_LL, C1, C2, and SE1 to SE4) |
| Voltage Excitation Terminals |
2 (VX1, VX2) |
| Communications Ports |
- USB Micro B
- RS-232
- 10/100 Ethernet RJ45
|
| Switched 12 Volt |
1 terminal |
| Digital I/O |
7 terminals (C1, C2, P_SW, and SE1 to SE4) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, and communication functions. Exception: The SE4 terminal doesn't do external interrupt. |
| Input Limits |
-100 to +2500 mV |
| Analog Voltage Accuracy |
- Accuracy specifications do not include sensor or measurement noise.
- ±(0.04% of measurement + offset) at 0° to 40°C
- ±(0.1% of measurement + offset) at -40° to +70°C
|
| ADC |
24-bit |
| Power Requirements |
16 to 32 Vdc for charger input (CHG) (Current limited to 0.9 A maximum for power converter or solar panel input.) |
| Real-Time Clock Accuracy |
±1 min. per month |
| Internet Protocols |
Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP(APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, NTP, Telnet, HTTP(S), FTP(S), SMTP/TLS, POP3/TLS, MQTT |
| Communication Protocols |
PakBus, Modbus, DNP3, SDI-12, TCP, UDP, and others |
| CPU Drive/Programs |
80 MB serial flash |
| Data Storage |
30 MB serial flash |
| Idle Current Drain, Average |
10 mA (@ 12 Vdc with Ethernet link idle) |
| Active Current Drain, Average |
56 mA (@ 12 Vdc with Ethernet link active, processor always on) |
| Dimensions |
16.26 x 7.62 x 5.68 cm (6.4 x 3.0 x 2.2 in.) |
| Weight |
288 to 306 g (0.64 to 0.68 lb) depending on communication option selected |
CR310-RF407 Option
|
| Radio Type |
Frequency Hopping Spread Spectrum (FHSS) |
| Output Power |
5 to 250 mW (user-selectable) |
| Frequency |
902 to 928 MHz (US, Canada) |
| RF Data Rate |
200 kbps |
| Receive Sensitivity |
-101 dBm |
| Antenna Connector |
RPSMA (external antenna required; see www.campbellsci.com/order/rf407 for Campbell Scientific antennas) |
| Idle Current Drain, Average |
12 mA (@ 12 Vdc) |
| Active Current Drain, Average |
< 80 mA (@ 12 Vdc) |
CR310-RF412 Option
|
| Radio Type |
Frequency Hopping Spread Spectrum (FHSS) |
| Output Power |
5 to 250 mW (user-selectable) |
| Frequency |
915 to 928 MHz (Australia, New Zealand) |
| RF Data Rate |
200 kbps |
| Receive Sensitivity |
-101 dBm |
| Antenna Connector |
RPSMA (external antenna required; see www.campbellsci.com/order/rf412 for Campbell Scientific antennas) |
| Idle Current Drain, Average |
12 mA (@ 12 Vdc) |
| Active Current Drain, Average |
< 80 mA (@ 12 Vdc) |
CR310-RF422 Option
|
| Radio Type |
868 MHz SRD 860 with Listen Before Talk (LBT) and Automatic Frequency Agility (AFA) |
| Output Power |
2 to 25 mW (user-selectable) |
| Frequency |
863 to 870 MHz (European Union) |
| RF Data Rate |
10 kbps |
| Receive Sensitivity |
-106 dBm |
| Antenna Connector |
(External antenna required; see www.campbellsci.com/order/rf422 for Campbell Scientific antennas.) |
| Idle Current Drain, Average |
9.5 mA |
| Active Current Drain, Average |
20 mA |
CR310-RF427 Option
|
| Radio Type |
Frequency Hopping Spread Spectrum (FHSS) |
| Output Power |
5 to 250 mW (user-selectable) |
| Frequency |
902 to 907.5 MHz/915 to 928 MHz (Brazil) |
| RF Data Rate |
200 kbps |
| Receive Sensitivity |
-101 dBm |
| Antenna Connector |
RPSMA (External antenna required.) |
| Idle Current Drain, Average |
12 mA (@ 12 Vdc) |
| Active Current Drain, Average |
< 80 mA (@ 12 Vdc) |
CR310-WIFI Option
|
| Operational Modes |
Client or Access Point |
| Operating Frequency |
2.4 GHz, 20 MHz bandwidth |
| Antenna Connector |
Reverse Polarity SMA (RPSMA) |
| Antenna |
pn 16005 unity gain (0 dBd), 1/2 wave whip, omnidirectional with articulating knuckle joint for vertical or horizontal orientation |
| Transmit Power |
7 to 18 dBm (5 to 63 mW) |
CR310-CELL205 Option
|
| -NOTE- |
The CR310-CELL205 option is not compatible with a Verizon cellular network. |
| Cell Technologies |
- 3G (UMTS/HSPA+)
- 4G (LTE CAT-1)
|
| 3G Frequency Bands |
850, 1700/2100 (AWS), and 1900 |
| 4G Frequency Bands |
700, 850, 1700/2100 (AWS-1), 1900 |
| Antenna Connector |
SMA (External antenna required; see www.campbellsci.com/order/cr310 for Campbell Scientific antennas.) |
| SIM Interface |
3FF (6 position/contacts)
Supports SIMs that require 1.8 or 3 V. |
CR310-CELL210 Option
|
| -NOTE- |
The CR310-CELL210 option is only compatible with a Verizon cellular network. CR310-CELL205 Option No |
| Cell Technologies |
4G (LTE CAT-1) |
| 4G Frequency Bands |
700, 850, 1700, 1900, 2100 |
| Antenna Connector |
SMA (External antenna required; see www.campbellsci.com/order/cr310 for Campbell Scientific antennas.) |
| SIM Interface |
3FF (6 position/contacts)
Supports SIMs that require 1.8 or 3 V. |
CR310-CELL215 Option
|
| -NOTE- |
The CR310-CELL215 option is intended for use in EMEA countries. |
| Cell Technologies |
- 2G (GSM/GPRS/EDGE)
- 3G (UMTS/HSPA+)
- 4G (LTE CAT-1)
|
| 2G Frequency Bands |
900 and 1800 MHz |
| 3G Frequency Bands |
850, 900, and 2100 MHz |
| 4G Frequency Bands |
800, 850, 900, 1800, 2100, and 2600 MHz |
| Antenna Connector |
SMA (External antenna required; see www.campbellsci.com/order/cr310 for Campbell Scientific antennas.) |
| SIM Interface |
3FF (6 position/contacts)
Supports SIMs that require 1.8 or 3 V. |
CR310-CELL220 Option
|
| -NOTE- |
The CR310-CELL220 option is intended for use in Australia and New Zealand. |
| Cell Technologies |
- 3G (UMTS/HSPA+)
- 4G (LTE CAT-1)
|
| 3G Frequency Bands |
- 850 and 2100 MHz (EC-21AUT)
- 850, 900, 1900, and 2100 MHz (EC-21AU)
|
| 4G Frequency Bands |
- 700, 850, 1800, 2100, and 2600 MHz (EC-21AUT)
- 700, 900, 1700, 1800, 1900, 2100, and 2600 MHz (EC-21AU)
|
| Antenna Connector |
SMA (External antenna required; see www.campbellsci.com/order/cr310 for Campbell Scientific antennas.) |
| SIM Interface |
3FF (6 position/contacts)
Supports SIMs that require 1.8 or 3 V. |
CR310-CELL225 Option
|
| -NOTE- |
The CR310-CELL225 option is intended for use in Japan. |
| Cell Technologies |
4G (LTE CAT-1) |
| 4G Frequency Bands |
800 (lower), 800 (upper), 850+, 900, 1800, and 2100 MHz |
| Antenna Connector |
SMA (External antenna required; see www.campbellsci.com/order/cr310 for Campbell Scientific antennas.) |
| SIM Interface |
3FF (6 position/contacts)
Supports SIMs that require 1.8 or 3 V. |
