UT30

La UT30 es una torre de instrumentos duradera que puede utilizarse para una gran variedad de aplicaciones. La torre UT30 proporciona un soporte robusto para muchas aplicaciones de vigilancia meteorológica, especialmente estaciones de calidad del aire y Mesonets regionales, donde la altura de medición de 9,14 m (30 pies) para sensores de viento es estándar. También soporta antenas, paneles solares, carcasas ambientales, escudos contra la radiación y crucetas. Es un soporte versátil para instrumentos: muchos de los mismos soportes para sensores que se utilizan con nuestros trípodes u otras torres pueden utilizarse con la UT30.

  • Soporte robusto y duradero para instrumentos
  • Resistente a la corrosión

 

Material Hardened drawn 6063-T832 aluminum
Guyed Tower Area Requirements ~5 m (17 ft) radius
Required Concrete Pad Dimensions 91 x 91 x 122 cm (36 x 36 x 48 in.) for B18 Concrete Mounting Base

Concrete pad requirements assume heavy soil; light, shifting, or sandy soils require a larger concrete pad.
Extendable Mast
  • 1.5 m (5 ft) length
  • 3.175 cm (1.25 in.) outer diameter (swagged to 2.5 cm [1 in.] outer diameter)
Pipe Outer Diameter
  • 2.5 cm (1.0 in.) for vertical tubing of upper sections
  • 3.18 cm (1.25 in.) for vertical tubing of lower section
  • 0.953 cm (0.375 in.) for cross supports/webbing
Crossarm Measurement Height 10 m (33 ft)
Height 10.1 m (33 ft)
Shipping Dimensions 310 x 46 x 46 cm (122 x 18 x 18 in.)
Shipping Weight 29 kg (65 lb)

Maximum Wind Load Recommendation
B18 Base (unguyed) 177 km/h (110 mph)
RFM18 Base (with UTGUY) 177 km/h (110 mph)
UTBASE (unguyed) 177 km/h (110 mph)
-NOTE- Wind load endurance is affected by quality of anchoring and installation; guy wire tension; soil type; guy angle; and number, type, and location of instruments fastened to the tower.

Wind load recommendation assumes proper installation, proper anchoring, adequate soil, and total instrument projected area of less than 0.19 m2 (2 ft2).

For the RFM18 base, the wind load recommendation also assumes that the UTGUY’s turnbuckles are preloaded just enough to equalize tension and that the tower is guyed at a 60 degree angle relative to the ground (maximum).
Brochure Solicitar cotización