NL201 Adaptador EtherNet (RS232 y CS I/O)

El módulo Campbell Scientific NL201 es un interface RS232/Ethernet que permite conectar dataloggers y periféricos a redes cableadas EtherNet. El NL201 soporta funciones de red sofisticadas, especialmente en redes PakBus con dispositivos PakBus. Configurándolo en modo "bridge" para el puerto CS I/O, el NL201 permite acceder al stack TCP/IP integrado en algunos de nuestros dataloggers. También puede funcionar como un típico "serial server TCP", "serial client", gateway ModBus TCP/IP, y TLS proxy server para HTTPS y comunicación del puerto definida por el usuario.

  • Extremely low power consumption (650 mW)
  • Provides access to the native Internet protocol capabilities of the CR6, CR800, CR850, CR1000, and CR3000
  • Rugged serial-to-Ethernet server for networking devices and peripherals
  • PakBus routing and device initiated connections
Transmission Distance or Area Worldwide
Power Connector CS I/O port or DC barrel connector (not powered over USB)
Power Requirements 7 to 20 Vdc
CS I/O Port SDC 7, 8,10, or 11 (does not support ME)
RS-232 Port DTE
USB Port Micro-B
Ethernet Port 10Base-T and 100Base-TX (full and half duplex), Auto-MDIX, Auto-IP (APIPA), IPv4, IPv6, ICMP/Ping, ICMPv6/ Ping, TCP, DHCP Client, SLAAC, DNS Client, HTTPS Proxy, Telnet Server, TLS, PakBus, Mobus TCP/IP
Connections/Routes Supported
  • Supports 50 simultaneous TCP connections.
  • Up to 10 of the 50 TCP connections can be used for TLS.
  • PakBus Router supports 50 routes.
  • 15 Modbus Server Transactions (maximum)
Temperature Range
  • -25° to +50°C (standard)
  • -55° to +85°C (extended)
Configuration
  • Device Configuration Utility over USB or Ethernet
  • Terminal menu over Telnet
  • Terminal menu over RS-232
Service Requirements Ethernet access
Dimensions 16 x 6.73 x 2.54 cm (6.3 x 2.65 x 1 in.)
Weight 177 g (6.3 oz)

Current Drain
Active 50 mA (@ 13 Vdc)
Forced Standby 2 mA (available when using Ethernet-to-CS I/O Bridge Mode)

Communication Rate
RS-232 Port 1200 bps to 115.2 kbps
CS I/O Port 9600 bps to 460.8 kbps
Ethernet 10/100 Mbps

Compliance
RoHS Compliant
European Standards Meets requirements for a class B device under European Standards.
Application of Council Directive(s) 2004/108/EC
Standards to Which Conformity Is Declared EN61326-1;2013
Brochure Solicitar cotización